After all, the charm of the honeydew wrap kit is that you can enjoy making it by yourself. I actually tried to make a honeydew wrap using the kit. The procedure is as follows. You can easily complete a stylish honey wax wrap.

Prepare what you will need in addition to the Mitsuro Wrap Kit. Newspaper and cookie sheets are essential to keep the ironing board and iron clean.

At this time, newspaper or cookie sheets should be wider than the cloth to prevent beeswax from overflowing.

The cloth in the honeydew wrap kit is 30cm square. The standard amount of honeydew to use is 25g. The kit contains 50g of beeswax, so you can keep it for a follow-up beeswax wrap, or make a beeswax wrap with other fabrics of your choice.

Apply an iron set at a low temperature (80°C to 120°C) by pressing down from above. Be careful not to burn yourself!

As the honeydew melts, it soaks into the cloth and darkens the color as if it were wet. When the entire surface is completely melted, it is OK.

Remove the cookie sheet and check for areas where there is not enough beeswax. If there are any areas lacking, place the beeswax there, lay the cookie sheet down, and iron again. To avoid burns when removing the cookie sheet, let it cool down a little before removing the cookie sheet.